khemservices.com
true
||

Formaldehyde 38%

Formaldehyde 38%
CAS:50-00-0
EINECS:200-001-8
Chemical Formula:HCHO
Material Category:Mixture
Synonyms:Formalin solution; Formol; Methanal solution; Methyl aldehyde solution
Melting/freezing point:< -15 ºC
Boiling point:93 - 96 ºC
Flash point:62 ºC
Density at 20 °C: 1.09 g/cm³
UN: 2209
ADR/RID: 8 C9 III
Quality: P.A.
Volumes: 5L
Packaging: Plastic container
Formaldehyde 38%

46 €

excl. VAT.

KH-CH-682

In Stock

1
Similar products
KHEM Product IDMaterial TypeCAS NumberEINECSChemical NameQualityWeight Or VolumePrice Excl. VAT (EUR)
KH-CH-061Mixture50-00-0200-001-8Formaldehyde 10%P.A. 5L41.00 €
KH-CH-681Mixture50-00-0200-001-8Formaldehyde 38%P.A.1L16.00 €
KH-BU-001Mixture50-00-0200-001-8Formaldehyde 10%P.A.50L245.00 €
KH-CH-060Mixture50-00-0200-001-8Formaldehyde 10%P.A. 1L15.00 €
KH-CH-682Mixture50-00-0200-001-8Formaldehyde 38%P.A.5L46.00 €
KH-CH-683Mixture50-00-0200-001-8Formaldehyde 38%P.A.50L299.00 €
Material Description
Clear colourless liquid with acrid odour
Disclaimer
The information provided about our chemical products' applications and uses is for general guidance only. Proper use depends on various factors, including, but not limited to, quality, concentration, volumes, and application conditions. We do not guarantee suitability for any specific purpose. The end user is solely responsible for verifying compliance with applicable regulations and conducting all necessary safety assessments. KHEM® Services disclaims all liability for misuse or improper handling of its products.
Applications
1. Chemical industry 
2. Environment 
3. Laboratory use
4. Pharmaceuticals
Uses
1. Used as a raw material for urea-formaldehyde, phenol-formaldehyde, and melamine-formaldehyde resins production, and composite wood products. 
2. Used to sterilize and disinfect surfaces and medical devices. 
3. Used as a solvent for reactions, separation techniques, and extracting organic compounds. 
4. Used as an intermediate in certain pharmaceutical formulations. 
5. Used in finishing processes for fabrics to improve wrinkle resistance.
CLP
Signal Word: Danger
Hazard Statements:
 H301+H311+H331: Toxic if swallowed, in contact with skin or if inhaled.
 H314: Causes severe skin burns and eye damage.
 H317: May cause an allergic skin reaction.
 H335: May cause respiratory irritation.
 H341: Suspected of causing genetic defects.
 H350: May cause cancer.
 H371: May cause damage to organs.
Precautionary Statements:
 P260: Do not breathe dust / fume / gas / mist / vapours / spray.
 P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
 P303+P361+P353: IF ON SKIN (or hair): Remove / Take off immediately all contaminated clothing. Rinse skin with water / shower.
 P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
 P405: Store locked up.
 P501a: Dispose of contents / container in accordance with local / regional / national / international regulations.